ENVIRO TECH INDUSTRIAL PRODUCTS
GST : 07AOSPS8386M1ZM

Call us now

08045477767

Sensocon USA Differential Pressure Transmitter Series DPT10-R8 - Range -1.25 - 1.25 mbar

Send Inquiry

Request To Call Back

Sensocon USA Differential Pressure Transmitter Series DPT10-R8 - Range -1.25 - 1.25 mbar

Get a Price/Quote

Sensocon USA Differential Pressure Transmitter Series DPT10-R8 - Range -1.25 - 1.25 mbar Specification

Sensor Type
Differential Pressure Transmitter

Thread
1/8 NPT

Display
No Display

Outer Size
Approx. 100mm x 85mm x 35mm

Seal Material
Silicone

Grade
Industrial

Material
ABS, Electronics, Silicone

Processing Type
Electronic

Diameter
Body Approx. 85mm

Mount Type
Wall Mount with Slots

Scale Range
-1.25 to 1.25 mbar

Accuracy
1% of FS

Finishing
High-Quality ABS Plastic Housing

Measure Pressure Of
Air and Non-Corrosive Gases

Accessories
Mounting Screws, Quick-Connect Fittings, Instruction Manual

Sensocon USA Differential Pressure Transmitter Series DPT10-R8 - Range -1.25 - 1.25 mbar Trade Information

Payment Terms
Cash on Delivery (COD), Cash Against Delivery (CAD), Cash in Advance (CID), Cheque, Cash Advance (CA)

Main Export Market(s)
Australia, North America, Eastern Europe, Western Europe, Africa, Central America, Middle East, South America, Asia

Main Domestic Market
All India

About Sensocon USA Differential Pressure Transmitter Series DPT10-R8 - Range -1.25 - 1.25 mbar

Sensocon USA Differential Pressure Transmitter Series DPT10-R8 - Range -1.25 - 1.25 mbar

APPLICATIONS

DPT-R8 series devices are commonly used in HVAC/R systems for: Fan, blower and filter monitoring Pressure and flow monitoring Valve and damper control Pressure monitoring in clean rooms

WARNING

READ THESE INSTRUCTIONS CAREFULLY BEFORE ATTEMPTING TO INSTALL, OPERATE OR SERVICE THIS DEVICE.

Failure to observe safety information and comply with instructions could result in PERSONAL INJURY, DEATH AND/ OR PROPERTY DAMAGE.

To avoid electrical shock or damage to equipment, disconnect power before installing or servicing and use only wiring with insulation rated for full device operating voltage.

To avoid potential fire and/or explosion do not use in potentially flammable or explosive atmospheres.

Retain these instructions for future reference.

This product, when installed, will be part of an engineered system whose specifications and performance characteristics are not designed or controlled by Sensocon. Review applications and national and local codes to assure that the installation will be functional and safe. Use only experienced, knowledgeable, technicians to install this device.

SPECIFICATIONS

Performance Accuracy (at applied pressure) Ranges < 0.5 inWC = 0.01 inWC Ranges 0.5 inWC = 1.5% inWC Accuracy specifications include: general accuracy, temperature drift, linearity, hysteresis, long term stability, and repetition error

Thermal Effects Temperature compensated across the full spectrum of capability

Overpressure Proof Pressure: 100 inWC Burst Pressure: 120 inWC

Zero Point Calibration Automatic with function or Manual push-button Auto-Zero

Response Time 4.0 0.8 sec, Selectable via Jumper

Technical Specifications Media Compatibility Dry air or non-aggressive gases

Measuring Units (select via Jumper) Pa, kPa, mbar, inWC, mmWC Measuring Element Piezoresistive

Environment: Operating Temperature: 14 122F (-10 50C) Storage Temperature: -4 158F (-20 70C) Humidity: 0 to 95 % rH, non condensing

Physical Case Dimensions: 3.54 x 3.74 x 1.4 (90.0 x 95.0 x 36.0 mm) Weight: 5.3 oz (150 g) Mounting: 2 each 0.1875 (4.3 mm) screw holes, one slotted Materials: Case: ABS (UL 94 V-0 Approved) Lid: PC (UL 94 V-1 Approved) Protection standard: IP54 / NEMA3

Display (optional) 3 1/2 Digit LCD Backlit Display 2-Line Display (12 character/line) Size: 1.81 W x 0.57 H (46.0 x 14.5 mm)

Electrical connections: 4 screw terminal block Wire: 12-24AWG (0.2 1.5 mm2

Cable Entry Strain Relief: M16 Knockout : 0.625 (16mm)

Pressure Fittings 3/16 (5.2mm) barbed brass + High pressure Low pressure

Electrical Voltage Circuit: 3-wire ([V Out], 24V, GND) Input: 24VAC or VDC, 10% Output: 0-10V or 0-5V, selectable via Jumper Power Consumption: <1.0W Resistance Minimum: 1k

Current Circuit: 3-wire (mA Out, 24V, GND) Input: 24VAC or VDC, 10% Output: 4

Industrial Performance and Precision

The Series DPT10-R8 from Sensocon guarantees accurate differential pressure measurement with 1% FS accuracy. Developed for demanding environments, it operates across a wide temperature range (-10C to +50C), supports overpressure up to 200 mbar, and processes low-pressure changes rapidly, making it ideal for HVAC, cleanrooms, and process control.

Simple Installation and Operation

Installation is quick, with wall mount slots, mounting screws, and quick-connect fittings included. Screw terminal electrical connections, an adjustable zero point on the front, and a user-friendly instruction manual ensure easy setup and routine maintenance for technicians and engineers.

Durable and Versatile Construction

Built from high-grade ABS, electronic components, and silicone, the Series DPT10-R8 is designed for long-lasting performance in industrial settings. The IP54 rating assures protection against dust and splash water, while the silicone seal material offers compatibility for measuring only air and non-corrosive gases.

FAQs of Sensocon USA Differential Pressure Transmitter Series DPT10-R8 - Range -1.25 - 1.25 mbar:

Q: How is the Sensocon DPT10-R8 differential pressure transmitter installed?

A: Installation involves wall mounting using the included mounting screws and aligning the device via the provided slots. Electrical connections are made using the screw terminals, and the quick-connect fittings allow easy attachment to air or non-corrosive gas lines.

Q: What media can be measured with the Series DPT10-R8 transmitter?

A: This transmitter is specifically designed to measure the pressure of air and non-corrosive gases only. Using it with corrosive or liquid media will damage the sensor and compromise accuracy.

Q: When should the zero point adjustment be performed?

A: Zero point adjustment should be carried out during initial installation and routinely as part of calibration procedures. Adjustment is straightforward using the front button to ensure highly accurate readings over time.

Q: Where is the Series DPT10-R8 typically used?

A: Common applications include HVAC systems, cleanrooms, filter monitoring, and process control environments where precise low-range differential pressure measurement is required.

Q: What benefits does the 4-20 mA output provide?

A: The 4-20 mA (2-wire) output offers reliable, interference-resistant transmission of measurement signals over long distances, suitable for integration with industrial process automation and data acquisition systems.

Q: How does the device maintain durability in industrial settings?

A: With its high-quality ABS plastic housing, silicone seals, and IP54 protection class, the DPT10-R8 resists dust, splash water, and mechanical impact, ensuring dependable operation in varied and challenging environments.

Tell us about your requirement