ENVIRO TECH INDUSTRIAL PRODUCTS
GST : 07AOSPS8386M1ZM

Call us now

08045477767

Sensocon USA Series DPT1-R8 - Range 0 - 0.1 in WC

Send Inquiry

Request To Call Back

Sensocon USA Series DPT1-R8 - Range 0 - 0.1 in WC

Get a Price/Quote

Sensocon USA Series DPT1-R8 - Range 0 - 0.1 in WC Specification

Sensor Type
Differential Pressure Sensor

Grade
Industrial

Outer Size
117 x 117 x 40 mm (Approx.)

Thread
1/8 NPT Female

Seal Material
EPDM

Display
Digital LCD

Material
ABS Plastic

Processing Type
Electronic

Diameter
117 mm (Front Panel Width)

Mount Type
Wall Mount

Scale Range
0 - 0.1 in WC

Accuracy
1.0% of FS

Finishing
ABS Plastic Housing

Measure Pressure Of
Air and Non-corrosive Gases

Accessories
Mounting screws, installation manual

Sensocon USA Series DPT1-R8 - Range 0 - 0.1 in WC Trade Information

Payment Terms
Cash on Delivery (COD), Cash Against Delivery (CAD), Cash in Advance (CID), Cheque, Cash Advance (CA)

Main Export Market(s)
Australia, Middle East, Western Europe, Africa, Central America, South America, Asia, Eastern Europe, North America

Main Domestic Market
All India

About Sensocon USA Series DPT1-R8 - Range 0 - 0.1 in WC

Sensocon USA Series DPT1-R8 - Range 0 - 0.1 in WC

APPLICATIONS

DPT-R8 series devices are commonly used in HVAC/R systems for: Fan, blower and filter monitoring Pressure and flow monitoring Valve and damper control Pressure monitoring in clean rooms

WARNING

READ THESE INSTRUCTIONS CAREFULLY BEFORE ATTEMPTING TO INSTALL, OPERATE OR SERVICE THIS DEVICE.

Failure to observe safety information and comply with instructions could result in PERSONAL INJURY, DEATH AND/ OR PROPERTY DAMAGE.

To avoid electrical shock or damage to equipment, disconnect power before installing or servicing and use only wiring with insulation rated for full device operating voltage.

To avoid potential fire and/or explosion do not use in potentially flammable or explosive atmospheres.

Retain these instructions for future reference.

This product, when installed, will be part of an engineered system whose specifications and performance characteristics are not designed or controlled by Sensocon. Review applications and national and local codes to assure that the installation will be functional and safe. Use only experienced, knowledgeable, technicians to install this device.

SPECIFICATIONS

Performance Accuracy (at applied pressure) Ranges < 0.5 inWC = 0.01 inWC Ranges 0.5 inWC = 1.5% inWC Accuracy specifications include: general accuracy, temperature drift, linearity, hysteresis, long term stability, and repetition error

Thermal Effects Temperature compensated across the full spectrum of capability

Overpressure Proof Pressure: 100 inWC Burst Pressure: 120 inWC

Zero Point Calibration Automatic with function or Manual push-button Auto-Zero

Response Time 4.0 0.8 sec, Selectable via Jumper

Technical Specifications Media Compatibility Dry air or non-aggressive gases

Measuring Units (select via Jumper) Pa, kPa, mbar, inWC, mmWC Measuring Element Piezoresistive

Environment: Operating Temperature: 14 122F (-10 50C) Storage Temperature: -4 158F (-20 70C) Humidity: 0 to 95 % rH, non condensing

Physical Case Dimensions: 3.54 x 3.74 x 1.4 (90.0 x 95.0 x 36.0 mm) Weight: 5.3 oz (150 g) Mounting: 2 each 0.1875 (4.3 mm) screw holes, one slotted Materials: Case: ABS (UL 94 V-0 Approved) Lid: PC (UL 94 V-1 Approved) Protection standard: IP54 / NEMA3

Display (optional) 3 1/2 Digit LCD Backlit Display 2-Line Display (12 character/line) Size: 1.81 W x 0.57 H (46.0 x 14.5 mm)

Electrical connections: 4 screw terminal block Wire: 12-24AWG (0.2 1.5 mm2

Cable Entry Strain Relief: M16 Knockout : 0.625 (16mm)

Pressure Fittings 3/16 (5.2mm) barbed brass + High pressure Low pressure

Electrical Voltage Circuit: 3-wire ([V Out], 24V, GND) Input: 24VAC or VDC, 10% Output: 0-10V or 0-5V, selectable via Jumper Power Consumption: <1.0W Resistance Minimum: 1k

Current Circuit: 3-wire (mA Out, 24V, GND) Input: 24VAC or VDC, 10% Output: 4

Versatile Output and Rapid Response

With selectable output signals (4-20 mA and 0-10 V), the DPT1-R8 adapts effortlessly to a variety of control systems. Its response time of less than 1 second ensures near-instant feedback for real-time monitoring and control of air or non-corrosive gas pressure.

Robust Design and Reliable Protection

The DPT1-R8 boasts an IP65 rating, safeguarding against dust and water ingress. Its ABS plastic housing and EPDM seals offer resilience and longevity, making it suitable for demanding industrial environments while providing consistent performance and user confidence.

FAQs of Sensocon USA Series DPT1-R8 - Range 0 - 0.1 in WC:

Q: How do I install the Sensocon USA Series DPT1-R8 differential pressure sensor?

A: The DPT1-R8 is designed for straightforward wall mounting. Use the supplied mounting screws and refer to the installation manual for guidance. Connect the 1/8 NPT female threads for pressure input and ensure the power supply is 24V AC/DC.

Q: What types of media can this sensor measure?

A: The Series DPT1-R8 is suitable for measuring the pressure of air and non-corrosive gases, making it ideal for HVAC, clean rooms, and other industrial air monitoring applications.

Q: When should I use the zero and span adjustment features?

A: Zero and span adjustments should be made during initial setup, calibration, or routine maintenance to ensure measurement accuracy. Adjustments are easily performed using the front-panel buttons.

Q: Where is the best place to install the DPT1-R8 for optimal performance?

A: Install the sensor in a location free from excessive vibration and direct exposure to corrosive substances. Wall mounting in a controlled indoor environment will yield the best results for long-term performance and accuracy.

Q: What is the process for switching output signals between 4-20 mA and 0-10 V?

A: Selecting the output signal (4-20 mA or 0-10 V) can be done using the settings as described in the installation manual. This flexibility enables integration into diverse control and monitoring setups.

Q: How does the fast response time benefit users?

A: A response time of less than 1 second allows for immediate detection of pressure changes, enhancing safety and enabling prompt corrective action within critical systems.

Q: What are the benefits of IP65 protection for this differential pressure sensor?

A: IP65 protection means the sensor is highly resistant to dust and low-pressure water sprays, ensuring reliable operation even in harsh industrial environments and prolonging the devices lifespan.

Tell us about your requirement