ENVIRO TECH INDUSTRIAL PRODUCTS
GST : 07AOSPS8386M1ZM

Call us now

08045477767

Sensocon USA Differential Pressure Transmitter Series DPT10-R8 - Range 0 - 1.25 mbar

Send Inquiry

Request To Call Back

Sensocon USA Differential Pressure Transmitter Series DPT10-R8 - Range 0 - 1.25 mbar

Get a Price/Quote

Sensocon USA Differential Pressure Transmitter Series DPT10-R8 - Range 0 - 1.25 mbar Specification

Seal Material
EPDM

Display
No Display (4-20mA output)

Sensor Type
Differential Pressure Transmitter

Thread
Push-on hose connection

Grade
Industrial

Outer Size
Approx. 90 x 65 x 36 mm

Material
ABS Housing, PCB electronics

Processing Type
Electronic

Mount Type
Wall/Panel Mount

Scale Range
0 - 1.25 mbar

Accuracy
1.5% of full scale

Finishing
ABS plastic enclosure, IP54 rated

Measure Pressure Of
Air and Non-aggressive Gases

Accessories
Mounting screws, Installation manual

Sensocon USA Differential Pressure Transmitter Series DPT10-R8 - Range 0 - 1.25 mbar Trade Information

Payment Terms
Cash on Delivery (COD), Cash Against Delivery (CAD), Cash Advance (CA), Cash in Advance (CID), Cheque

Main Export Market(s)
Middle East, Western Europe, Africa, Central America, Eastern Europe, South America, Asia, North America, Australia

Main Domestic Market
All India

About Sensocon USA Differential Pressure Transmitter Series DPT10-R8 - Range 0 - 1.25 mbar

Sensocon USA Differential Pressure Transmitter Series DPT10-R8 - Range 0 - 1.25 mbar

APPLICATIONS

DPT-R8 series devices are commonly used in HVAC/R systems for: Fan, blower and filter monitoring Pressure and flow monitoring Valve and damper control Pressure monitoring in clean rooms

WARNING

READ THESE INSTRUCTIONS CAREFULLY BEFORE ATTEMPTING TO INSTALL, OPERATE OR SERVICE THIS DEVICE.

Failure to observe safety information and comply with instructions could result in PERSONAL INJURY, DEATH AND/ OR PROPERTY DAMAGE.

To avoid electrical shock or damage to equipment, disconnect power before installing or servicing and use only wiring with insulation rated for full device operating voltage.

To avoid potential fire and/or explosion do not use in potentially flammable or explosive atmospheres.

Retain these instructions for future reference.

This product, when installed, will be part of an engineered system whose specifications and performance characteristics are not designed or controlled by Sensocon. Review applications and national and local codes to assure that the installation will be functional and safe. Use only experienced, knowledgeable, technicians to install this device.

SPECIFICATIONS

Performance Accuracy (at applied pressure) Ranges < 0.5 inWC = 0.01 inWC Ranges 0.5 inWC = 1.5% inWC Accuracy specifications include: general accuracy, temperature drift, linearity, hysteresis, long term stability, and repetition error

Thermal Effects Temperature compensated across the full spectrum of capability

Overpressure Proof Pressure: 100 inWC Burst Pressure: 120 inWC

Zero Point Calibration Automatic with function or Manual push-button Auto-Zero

Response Time 4.0 0.8 sec, Selectable via Jumper

Technical Specifications Media Compatibility Dry air or non-aggressive gases

Measuring Units (select via Jumper) Pa, kPa, mbar, inWC, mmWC Measuring Element Piezoresistive

Environment: Operating Temperature: 14 122F (-10 50C) Storage Temperature: -4 158F (-20 70C) Humidity: 0 to 95 % rH, non condensing

Physical Case Dimensions: 3.54 x 3.74 x 1.4 (90.0 x 95.0 x 36.0 mm) Weight: 5.3 oz (150 g) Mounting: 2 each 0.1875 (4.3 mm) screw holes, one slotted Materials: Case: ABS (UL 94 V-0 Approved) Lid: PC (UL 94 V-1 Approved) Protection standard: IP54 / NEMA3

Display (optional) 3 1/2 Digit LCD Backlit Display 2-Line Display (12 character/line) Size: 1.81 W x 0.57 H (46.0 x 14.5 mm)

Electrical connections: 4 screw terminal block Wire: 12-24AWG (0.2 1.5 mm2

Cable Entry Strain Relief: M16 Knockout : 0.625 (16mm)

Pressure Fittings 3/16 (5.2mm) barbed brass + High pressure Low pressure

Electrical Voltage Circuit: 3-wire ([V Out], 24V, GND) Input: 24VAC or VDC, 10% Output: 0-10V or 0-5V, selectable via Jumper Power Consumption: <1.0W Resistance Minimum: 1k

Current Circuit: 3-wire (mA Out, 24V, GND) Input: 24VAC or VDC, 10% Output: 4

Reliable Low-Pressure Monitoring

The DPT10-R8 delivers accurate differential pressure measurement in the 0 to 1.25 mbar range, making it suitable for monitoring air flow, filter status, and clean room pressure. Its electronic processing ensures rapid response times and heightened measurement stability, supporting reliable and continuous performance in demanding industrial environments.

Flexible Installation & Robust Design

With an industrial-grade ABS enclosure and IP54 ingress protection, the DPT10-R8 withstands challenging conditions. Its compact size facilitates mounting on walls or panels, and push-on hose connections simplify integration into existing systems. Included accessories and a convenient electrical screw terminal design help streamline installation and maintenance efforts.

FAQs of Sensocon USA Differential Pressure Transmitter Series DPT10-R8 - Range 0 - 1.25 mbar:

Q: How do I install the Sensocon DPT10-R8 differential pressure transmitter?

A: The DPT10-R8 can be mounted on a wall or panel using the included mounting screws. Simply secure the transmitter, connect the air hoses to the push-on hose fittings, and attach power and signal wiring to the screw terminals as per the installation manual.

Q: What kinds of media can be measured with this differential pressure transmitter?

A: This device is optimized for measuring the differential pressure of dry, clean, and non-corrosive gases, such as air, within its specified pressure range.

Q: When is manual zero and span adjustment required, and how is it performed?

A: Manual zero and span adjustments ensure measurement accuracy and may be required during initial setup or routine calibration. Adjustments are performed using the trimpots located on the transmitter, following the instructions detailed in the installation manual.

Q: Where can the DPT10-R8 be used effectively?

A: The transmitter is suitable for industrial environments, particularly HVAC systems, clean rooms, and process control where precise, reliable monitoring of low differential pressures is needed.

Q: What is the benefit of the 420 mA output signal provided by this transmitter?

A: The 420 mA current loop output offers noise immunity and compatibility with standard industrial process controllers, ensuring accurate remote pressure readings over long distances.

Q: How does the IP54 protection rating benefit the installation?

A: An IP54 protection rating means the housing guards against dust ingress and water splashes, allowing reliable performance even in demanding industrial environments where such exposure may occur.

Tell us about your requirement