ENVIRO TECH INDUSTRIAL PRODUCTS
GST : 07AOSPS8386M1ZM

Call us now

08045477767

Sensocon USA Differential Pressure Transmitter Series DPT10-R8 - Range 0 - 6.2 mbar

Send Inquiry

Request To Call Back

Sensocon USA Differential Pressure Transmitter Series DPT10-R8 - Range 0 - 6.2 mbar

Get a Price/Quote

Sensocon USA Differential Pressure Transmitter Series DPT10-R8 - Range 0 - 6.2 mbar Specification

Seal Material
Silicone

Sensor Type
Differential Pressure Sensor

Outer Size
110 x 58 x 22 mm

Thread
Push-on connection, 6 mm

Grade
Industrial

Display
No Display

Material
ABS Plastic Housing

Processing Type
Electronic

Mount Type
Wall Mount

Scale Range
0 - 6.2 mbar

Accuracy
2% of full scale

Finishing
Matte, High Impact Plastic

Measure Pressure Of
Air & Non-Aggressive Gases

Accessories
Mounting Screws, Installation Manual

Operating Temperature Range
0C to +50C

Media Compatibility
Clean, Dry Air and Non-Corrosive Gases

Mounting Orientation
Any position (recommended vertical)

Repeatability
< 0.2% FSO

Electrical Connection
Screw Terminals

Protection Class
IP54

Hysteresis
< 0.05% of full scale

Weight
Approx. 80 g

Power Supply
10 35 VDC

Response Time
< 10 ms

Zero Adjustment
Yes (with push button)

Output Signal
4-20 mA, 2-wire loop powered

Model
DPT10-R8

Sensocon USA Differential Pressure Transmitter Series DPT10-R8 - Range 0 - 6.2 mbar Trade Information

Payment Terms
Cash on Delivery (COD), Cash Advance (CA), Cash Against Delivery (CAD), Cash in Advance (CID), Cheque

Main Export Market(s)
Middle East, Western Europe, Africa, Central America, Eastern Europe, South America, Asia, North America, Australia

Main Domestic Market
All India

About Sensocon USA Differential Pressure Transmitter Series DPT10-R8 - Range 0 - 6.2 mbar

Sensocon USA Differential Pressure Transmitter Series DPT10-R8 - Range 0 - 6.2 mbar

APPLICATIONS

DPT-R8 series devices are commonly used in HVAC/R systems for: Fan, blower and filter monitoring Pressure and flow monitoring Valve and damper control Pressure monitoring in clean rooms

WARNING

READ THESE INSTRUCTIONS CAREFULLY BEFORE ATTEMPTING TO INSTALL, OPERATE OR SERVICE THIS DEVICE.

Failure to observe safety information and comply with instructions could result in PERSONAL INJURY, DEATH AND/ OR PROPERTY DAMAGE.

To avoid electrical shock or damage to equipment, disconnect power before installing or servicing and use only wiring with insulation rated for full device operating voltage.

To avoid potential fire and/or explosion do not use in potentially flammable or explosive atmospheres.

Retain these instructions for future reference.

This product, when installed, will be part of an engineered system whose specifications and performance characteristics are not designed or controlled by Sensocon. Review applications and national and local codes to assure that the installation will be functional and safe. Use only experienced, knowledgeable, technicians to install this device.

SPECIFICATIONS

Performance Accuracy (at applied pressure) Ranges < 0.5 inWC = 0.01 inWC Ranges 0.5 inWC = 1.5% inWC Accuracy specifications include: general accuracy, temperature drift, linearity, hysteresis, long term stability, and repetition error

Thermal Effects Temperature compensated across the full spectrum of capability

Overpressure Proof Pressure: 100 inWC Burst Pressure: 120 inWC

Zero Point Calibration Automatic with function or Manual push-button Auto-Zero

Response Time 4.0 0.8 sec, Selectable via Jumper

Technical Specifications Media Compatibility Dry air or non-aggressive gases

Measuring Units (select via Jumper) Pa, kPa, mbar, inWC, mmWC Measuring Element Piezoresistive

Environment: Operating Temperature: 14 122F (-10 50C) Storage Temperature: -4 158F (-20 70C) Humidity: 0 to 95 % rH, non condensing

Physical Case Dimensions: 3.54 x 3.74 x 1.4 (90.0 x 95.0 x 36.0 mm) Weight: 5.3 oz (150 g) Mounting: 2 each 0.1875 (4.3 mm) screw holes, one slotted Materials: Case: ABS (UL 94 V-0 Approved) Lid: PC (UL 94 V-1 Approved) Protection standard: IP54 / NEMA3

Display (optional) 3 1/2 Digit LCD Backlit Display 2-Line Display (12 character/line) Size: 1.81 W x 0.57 H (46.0 x 14.5 mm)

Electrical connections: 4 screw terminal block Wire: 12-24AWG (0.2 1.5 mm2

Cable Entry Strain Relief: M16 Knockout : 0.625 (16mm)

Pressure Fittings 3/16 (5.2mm) barbed brass + High pressure Low pressure

Electrical Voltage Circuit: 3-wire ([V Out], 24V, GND) Input: 24VAC or VDC, 10% Output: 0-10V or 0-5V, selectable via Jumper Power Consumption: <1.0W Resistance Minimum: 1k

Current Circuit: 3-wire (mA Out, 24V, GND) Input: 24VAC or VDC, 10% Output: 4

Easy Wall Mount Installation

Mounting the DPT10-R8 is direct thanks to its lightweight ABS plastic housing, wall-mount brackets, and included screws. The vertical orientation is recommended for optimal accuracy, but it can be installed in any position if needed. Screw terminals simplify wiring, while the compact design ensures it complements any facility layout without occupying much space.

Reliable Performance for Clean Air Applications

This transmitter is engineered for clean, dry air and non-aggressive gases. Its fast response time under 10 ms and output range of 0-6.2 mbar make it reliable for real-time monitoring in sensitive environments like laboratories, HVAC systems, and filter monitoring. The high-precision electronics deliver repeatable, stable outputs for consistent results.

Built for Durability and Ease of Use

Constructed with a matte-finish, high-impact ABS plastic enclosure and a silicone seal, the DPT10-R8 withstands demanding industrial environments. IP54 protection ensures dust and splash resistance. Zero adjustment via a push button and no display enhances simplicity and operational confidence, while clear installation manuals streamline the setup process.

FAQs of Sensocon USA Differential Pressure Transmitter Series DPT10-R8 - Range 0 - 6.2 mbar:

Q: How do I install the Sensocon DPT10-R8 differential pressure transmitter?

A: To install the DPT10-R8, mount it on a suitable wall surface using the provided screws and brackets. Connect the pressure ports to 6 mm push-on fittings, wire the power and signal terminals via the screw connectors, and follow the setup instructions in the manual. It is best installed vertically for maximum accuracy, but other orientations are permissible.

Q: What types of media can the DPT10-R8 measure pressure for?

A: The transmitter is designed for use with clean, dry air and non-aggressive, non-corrosive gases. It should not be used with liquids or harsh chemicals to ensure accurate measurements and prevent sensor damage.

Q: When should zero adjustment be performed?

A: Zero adjustment should be completed during initial setup and periodically thereafter to maintain measurement accuracy. The device includes a push button for easy zero calibration, ensuring reliable performance over time.

Q: Where can I use the DPT10-R8 pressure transmitter?

A: The DPT10-R8 is ideal for industrial environments, HVAC systems, clean rooms, laboratories, and filtration monitoringanywhere precise low differential air or gas pressure measurement is required. Its IP54-rated enclosure makes it suitable for indoor applications with moderate exposure to dust or moisture.

Q: What benefits does the 4-20 mA output provide?

A: The 4-20 mA analog output ensures robust, interference-resistant signal transmission over long cable distances, making it suitable for industrial process control systems. It simplifies integration with most PLCs, controllers, or display modules.

Q: How does the DPT10-R8 enhance process reliability?

A: With an accuracy of 2% of full scale, repeatability under 0.2% FSO, and hysteresis below 0.05%, the DPT10-R8 guarantees high measurement consistency. The fast <10 ms response time allows for real-time monitoring and timely process control adjustments.