ENVIRO TECH INDUSTRIAL PRODUCTS
GST : 07AOSPS8386M1ZM

Call us now

08045477767

Sensocon USA Differential Pressure Transmitter Series DPT10-R8 - Range 0 - 25.4 mmWC

Send Inquiry

Request To Call Back

Sensocon USA Differential Pressure Transmitter Series DPT10-R8 - Range 0 - 25.4 mmWC

Get a Price/Quote

Sensocon USA Differential Pressure Transmitter Series DPT10-R8 - Range 0 - 25.4 mmWC Specification

Display
Without Display

Seal Material
Nitrile Rubber (Standard)

Sensor Type
Differential Pressure Transmitter

Grade
Industrial Grade

Outer Size
92 mm x 92 mm x 53 mm (Approx.)

Thread
1/8 NPT (Female)

Material
ABS Plastic and Anodized Aluminum

Processing Type
Electronic

Diameter
92 mm

Mount Type
Wall / Panel Mount

Scale Range
0 - 25.4 mmWC

Accuracy
1% of Full Scale

Finishing
Anodized Aluminum Housing

Measure Pressure Of
Air and Non-Corrosive Gases

Accessories
Mounting Bracket, Manual, Calibration Certificate

Response Time
< 5 ms

Weight
Approx. 170 g

Protection Class
IP54

Electrical Connection
Screw Terminal Block

Power Supply
24 VDC (typical, 8-35 VDC range)

Temperature Range
-10C to +50C (Ambient), 0C to 50C (Media)

Output
4-20 mA, 2-wire

Overpressure Limit
100 kPa

Compliance
CE Marked

Sensocon USA Differential Pressure Transmitter Series DPT10-R8 - Range 0 - 25.4 mmWC Trade Information

Payment Terms
Cash on Delivery (COD), Cash Against Delivery (CAD), Cash in Advance (CID), Cheque, Cash Advance (CA)

Main Export Market(s)
Australia, North America, Eastern Europe, Middle East, Western Europe, Africa, Central America, South America, Asia

Main Domestic Market
All India

About Sensocon USA Differential Pressure Transmitter Series DPT10-R8 - Range 0 - 25.4 mmWC

Sensocon USA Differential Pressure Transmitter Series DPT10-R8 - Range 0 - 25.4 mmWC

APPLICATIONS

DPT-R8 series devices are commonly used in HVAC/R systems for: Fan, blower and filter monitoring Pressure and flow monitoring Valve and damper control Pressure monitoring in clean rooms

WARNING

READ THESE INSTRUCTIONS CAREFULLY BEFORE ATTEMPTING TO INSTALL, OPERATE OR SERVICE THIS DEVICE.

Failure to observe safety information and comply with instructions could result in PERSONAL INJURY, DEATH AND/ OR PROPERTY DAMAGE.

To avoid electrical shock or damage to equipment, disconnect power before installing or servicing and use only wiring with insulation rated for full device operating voltage.

To avoid potential fire and/or explosion do not use in potentially flammable or explosive atmospheres.

Retain these instructions for future reference.

This product, when installed, will be part of an engineered system whose specifications and performance characteristics are not designed or controlled by Sensocon. Review applications and national and local codes to assure that the installation will be functional and safe. Use only experienced, knowledgeable, technicians to install this device.

SPECIFICATIONS

Performance Accuracy (at applied pressure) Ranges < 0.5 inWC = 0.01 inWC Ranges 0.5 inWC = 1.5% inWC Accuracy specifications include: general accuracy, temperature drift, linearity, hysteresis, long term stability, and repetition error

Thermal Effects Temperature compensated across the full spectrum of capability

Overpressure Proof Pressure: 100 inWC Burst Pressure: 120 inWC

Zero Point Calibration Automatic with function or Manual push-button Auto-Zero

Response Time 4.0 0.8 sec, Selectable via Jumper

Technical Specifications Media Compatibility Dry air or non-aggressive gases

Measuring Units (select via Jumper) Pa, kPa, mbar, inWC, mmWC Measuring Element Piezoresistive

Environment: Operating Temperature: 14 122F (-10 50C) Storage Temperature: -4 158F (-20 70C) Humidity: 0 to 95 % rH, non condensing

Physical Case Dimensions: 3.54 x 3.74 x 1.4 (90.0 x 95.0 x 36.0 mm) Weight: 5.3 oz (150 g) Mounting: 2 each 0.1875 (4.3 mm) screw holes, one slotted Materials: Case: ABS (UL 94 V-0 Approved) Lid: PC (UL 94 V-1 Approved) Protection standard: IP54 / NEMA3

Display (optional) 3 1/2 Digit LCD Backlit Display 2-Line Display (12 character/line) Size: 1.81 W x 0.57 H (46.0 x 14.5 mm)

Electrical connections: 4 screw terminal block Wire: 12-24AWG (0.2 1.5 mm2

Cable Entry Strain Relief: M16 Knockout : 0.625 (16mm)

Pressure Fittings 3/16 (5.2mm) barbed brass + High pressure Low pressure

Electrical Voltage Circuit: 3-wire ([V Out], 24V, GND) Input: 24VAC or VDC, 10% Output: 0-10V or 0-5V, selectable via Jumper Power Consumption: <1.0W Resistance Minimum: 1k

Current Circuit: 3-wire (mA Out, 24V, GND) Input: 24VAC or VDC, 10% Output: 4

Reliable Differential Pressure Monitoring

The DPT10-R8 provides accurate measurement of low pressure differentials for air and non-corrosive gases, making it suitable for use in HVAC, air handling units, and cleanroom pressurization. Its rapid response time of less than 5 ms ensures real-time monitoring and operational efficiency. This transmitter is built to withstand challenging industrial environments, thanks to its robust anodized aluminum body and IP54 rating.

Versatile Mounting and Easy Integration

Designed for both wall and panel mounting, the DPT10-R8 fits seamlessly into various installation scenarios. It features standard 1/8" NPT (female) connections, screw terminal block wiring, and is supplied with a mounting bracket, ensuring an uncomplicated installation process. Its lightweight design and CE compliance further enhance its adaptability in industrial settings.

FAQs of Sensocon USA Differential Pressure Transmitter Series DPT10-R8 - Range 0 - 25.4 mmWC:

Q: How does the DPT10-R8 Differential Pressure Transmitter operate?

A: The DPT10-R8 measures pressure differences between two points in air or non-corrosive gas systems. It converts this differential pressure into a standardized 4-20 mA electrical output signal for integration with industrial controllers or displays.

Q: What types of environments can the DPT10-R8 be installed in?

A: This transmitter is built for industrial settings with an ambient temperature range of -10C to +50C and a media temperature range of 0C to 50C. Its IP54 protection class allows installation in moderately demanding environments where dust and moisture may be present.

Q: When should this pressure transmitter be calibrated?

A: For optimal accuracy, calibration should be performed during commissioning and periodically, as recommended by your facilitys maintenance schedule. A calibration certificate is included to verify initial accuracy.

Q: Where can the DPT10-R8 measure pressure?

A: This transmitter is designed to measure the differential pressure of air and non-corrosive gases in ventilation, filtration, and monitoring systems. It is typically installed on walls or panels within these setups.

Q: What are the key benefits of using this transmitter in my process?

A: The DPT10-R8 offers high accuracy (1% F.S.), fast response (<5 ms), robust construction, and easy installation. Its electronic design provides stable, repeatable readings vital for maintaining process control and regulatory compliance.

Q: How is the electrical connection made to the DPT10-R8?

A: The transmitter uses a screw terminal block for secure and robust electrical connections, compatible with standard industrial wiring.

Q: Which accessories are supplied with the DPT10-R8?

A: Each unit comes with a mounting bracket for installation, a user manual for guidance, and a calibration certificate to ensure traceable accuracy from the manufacturer.

Tell us about your requirement