ENVIRO TECH INDUSTRIAL PRODUCTS
GST : 07AOSPS8386M1ZM

Call us now

08045477767

Sensocon USA Differential Pressure Transmitter Series DPT10-R8 - Range 0 - 250 Pa

Send Inquiry

Request To Call Back

Sensocon USA Differential Pressure Transmitter Series DPT10-R8 - Range 0 - 250 Pa

Get a Price/Quote

Sensocon USA Differential Pressure Transmitter Series DPT10-R8 - Range 0 - 250 Pa Specification

Seal Material
EPDM Rubber

Grade
Industrial

Sensor Type
Differential Pressure Sensor

Thread
1/8 NPT Female

Outer Size
110 mm x 90 mm x 36 mm (L x W x D)

Material
ABS Plastic

Processing Type
Electronic

Diameter
110 mm

Mount Type
Wall Mount

Scale Range
0 - 250 Pa

Accuracy
1.5% FS

Finishing
Matte Grey Plastic Housing

Measure Pressure Of
Air and Compatible Gases

Accessories
Mounting screws and instruction manual

Sensocon USA Differential Pressure Transmitter Series DPT10-R8 - Range 0 - 250 Pa Trade Information

Payment Terms
Cash on Delivery (COD), Cash Advance (CA), Cash Against Delivery (CAD), Cash in Advance (CID), Cheque

Main Export Market(s)
Australia, South America, Eastern Europe, Middle East, Western Europe, Africa, Central America, Asia, North America

Main Domestic Market
All India

About Sensocon USA Differential Pressure Transmitter Series DPT10-R8 - Range 0 - 250 Pa

Sensocon USA Differential Pressure Transmitter Series DPT10-R8 - Range 0 - 250 Pa

APPLICATIONS

DPT-R8 series devices are commonly used in HVAC/R systems for: Fan, blower and filter monitoring Pressure and flow monitoring Valve and damper control Pressure monitoring in clean rooms

WARNING

READ THESE INSTRUCTIONS CAREFULLY BEFORE ATTEMPTING TO INSTALL, OPERATE OR SERVICE THIS DEVICE.

Failure to observe safety information and comply with instructions could result in PERSONAL INJURY, DEATH AND/ OR PROPERTY DAMAGE.

To avoid electrical shock or damage to equipment, disconnect power before installing or servicing and use only wiring with insulation rated for full device operating voltage.

To avoid potential fire and/or explosion do not use in potentially flammable or explosive atmospheres.

Retain these instructions for future reference.

This product, when installed, will be part of an engineered system whose specifications and performance characteristics are not designed or controlled by Sensocon. Review applications and national and local codes to assure that the installation will be functional and safe. Use only experienced, knowledgeable, technicians to install this device.

SPECIFICATIONS

Performance Accuracy (at applied pressure) Ranges < 0.5 inWC = 0.01 inWC Ranges 0.5 inWC = 1.5% inWC Accuracy specifications include: general accuracy, temperature drift, linearity, hysteresis, long term stability, and repetition error

Thermal Effects Temperature compensated across the full spectrum of capability

Overpressure Proof Pressure: 100 inWC Burst Pressure: 120 inWC

Zero Point Calibration Automatic with function or Manual push-button Auto-Zero

Response Time 4.0 0.8 sec, Selectable via Jumper

Technical Specifications Media Compatibility Dry air or non-aggressive gases

Measuring Units (select via Jumper) Pa, kPa, mbar, inWC, mmWC Measuring Element Piezoresistive

Environment: Operating Temperature: 14 122F (-10 50C) Storage Temperature: -4 158F (-20 70C) Humidity: 0 to 95 % rH, non condensing

Physical Case Dimensions: 3.54 x 3.74 x 1.4 (90.0 x 95.0 x 36.0 mm) Weight: 5.3 oz (150 g) Mounting: 2 each 0.1875 (4.3 mm) screw holes, one slotted Materials: Case: ABS (UL 94 V-0 Approved) Lid: PC (UL 94 V-1 Approved) Protection standard: IP54 / NEMA3

Display (optional) 3 1/2 Digit LCD Backlit Display 2-Line Display (12 character/line) Size: 1.81 W x 0.57 H (46.0 x 14.5 mm)

Electrical connections: 4 screw terminal block Wire: 12-24AWG (0.2 1.5 mm2

Cable Entry Strain Relief: M16 Knockout : 0.625 (16mm)

Pressure Fittings 3/16 (5.2mm) barbed brass + High pressure Low pressure

Electrical Voltage Circuit: 3-wire ([V Out], 24V, GND) Input: 24VAC or VDC, 10% Output: 0-10V or 0-5V, selectable via Jumper Power Consumption: <1.0W Resistance Minimum: 1k

Current Circuit: 3-wire (mA Out, 24V, GND) Input: 24VAC or VDC, 10% Output: 4

Reliable Low-Pressure Measurement

The Series DPT10-R8 ensures accurate differential pressure monitoring from 0 to 250 Pa, making it an excellent choice for sensitive air and gas measurement in industrial settings such as cleanrooms and ventilation systems. With an accuracy of 1.5% full scale, you can trust its readings for effective process control.

Simple Installation and Adjustment

The transmitter is effortless to install with included mounting screws and wall-mount design. Electrical connections are made easy via screw terminals, while manual zero adjustment on the front panel allows calibration to maintain optimal performance. Its compact and robust enclosure suits various industrial environments.

FAQs of Sensocon USA Differential Pressure Transmitter Series DPT10-R8 - Range 0 - 250 Pa:

Q: How is the Series DPT10-R8 differential pressure transmitter installed?

A: The transmitter is designed for wall mounting using the provided screws. Electrical connections are easily completed using the screw terminals, and the 1/8 NPT female threads allow for secure pneumatic connections to your air or compatible gas lines.

Q: What calibration and adjustment options are available for this device?

A: The DPT10-R8 features manual zero adjustment accessible from the front panel. This lets you reset the zero point to ensure precise readings and compensate for environmental or installation changes.

Q: Where can this differential pressure transmitter be used?

A: It is widely used in HVAC systems, cleanrooms, filter monitoring, and process industries throughout India, where measuring air or non-aggressive gas pressure differentials with high precision is essential.

Q: When should I use a differential pressure transmitter like the DPT10-R8?

A: Use this transmitter when you need to monitor small pressure differences, especially in applications where maintaining specific pressure levels is critical for safety, efficiency, or regulatory compliance, such as laboratory air control or facility ventilation.

Q: What are the main benefits of the DPT10-R8 transmitter for industrial applications?

A: Key benefits include quick response time (<1 second), high accuracy (1.5% FS), durable IP54 housing, and compatibility with a variety of non-aggressive gases. Its robust construction and easy calibration make it ideal for demanding industrial environments.

Q: How does the output signal facilitate process integration?

A: The 4-20 mA, 2-wire output provides a standard, reliable signal widely used in industrial control systems, ensuring seamless integration into existing monitoring or automation infrastructure.

Tell us about your requirement