ENVIRO TECH INDUSTRIAL PRODUCTS
GST : 07AOSPS8386M1ZM

Call us now

08045477767

Sensocon USA Differential Pressure Transmitter Series DPT10-R8 - Range 0 - 127 mmWC

Send Inquiry

Request To Call Back

Sensocon USA Differential Pressure Transmitter Series DPT10-R8 - Range 0 - 127 mmWC

Get a Price/Quote

Sensocon USA Differential Pressure Transmitter Series DPT10-R8 - Range 0 - 127 mmWC Specification

Grade
Industrial Grade

Seal Material
EPDM

Sensor Type
Differential Pressure Transmitter

Thread
1/8 NPT Female

Display
No Display (Output Transmitter)

Outer Size
Approx. 98 mm x 69 mm x 36 mm

Material
Polycarbonate housing, silicon sensor

Processing Type
Electronic (Transducer)

Diameter
69 mm (enclosure width)

Mount Type
Wall Mount

Scale Range
0 - 127 mmWC

Accuracy
1.5% of full scale

Finishing
Polycarbonate enclosure, IP65

Measure Pressure Of
Air and Non-corrosive Gases

Accessories
Mounting brackets, screws, instruction manual

Sensocon USA Differential Pressure Transmitter Series DPT10-R8 - Range 0 - 127 mmWC Trade Information

Payment Terms
Cash on Delivery (COD), Cash Against Delivery (CAD), Cash in Advance (CID), Cheque, Cash Advance (CA)

Main Export Market(s)
Australia, North America, South America, Eastern Europe, Middle East, Western Europe, Africa, Central America, Asia

Main Domestic Market
All India

About Sensocon USA Differential Pressure Transmitter Series DPT10-R8 - Range 0 - 127 mmWC

Sensocon USA Differential Pressure Transmitter Series DPT10-R8 - Range 0 - 127 mmWC

APPLICATIONS

DPT-R8 series devices are commonly used in HVAC/R systems for: Fan, blower and filter monitoring Pressure and flow monitoring Valve and damper control Pressure monitoring in clean rooms

WARNING

READ THESE INSTRUCTIONS CAREFULLY BEFORE ATTEMPTING TO INSTALL, OPERATE OR SERVICE THIS DEVICE.

Failure to observe safety information and comply with instructions could result in PERSONAL INJURY, DEATH AND/ OR PROPERTY DAMAGE.

To avoid electrical shock or damage to equipment, disconnect power before installing or servicing and use only wiring with insulation rated for full device operating voltage.

To avoid potential fire and/or explosion do not use in potentially flammable or explosive atmospheres.

Retain these instructions for future reference.

This product, when installed, will be part of an engineered system whose specifications and performance characteristics are not designed or controlled by Sensocon. Review applications and national and local codes to assure that the installation will be functional and safe. Use only experienced, knowledgeable, technicians to install this device.

SPECIFICATIONS

Performance Accuracy (at applied pressure) Ranges < 0.5 inWC = 0.01 inWC Ranges 0.5 inWC = 1.5% inWC Accuracy specifications include: general accuracy, temperature drift, linearity, hysteresis, long term stability, and repetition error

Thermal Effects Temperature compensated across the full spectrum of capability

Overpressure Proof Pressure: 100 inWC Burst Pressure: 120 inWC

Zero Point Calibration Automatic with function or Manual push-button Auto-Zero

Response Time 4.0 0.8 sec, Selectable via Jumper

Technical Specifications Media Compatibility Dry air or non-aggressive gases

Measuring Units (select via Jumper) Pa, kPa, mbar, inWC, mmWC Measuring Element Piezoresistive

Environment: Operating Temperature: 14 122F (-10 50C) Storage Temperature: -4 158F (-20 70C) Humidity: 0 to 95 % rH, non condensing

Physical Case Dimensions: 3.54 x 3.74 x 1.4 (90.0 x 95.0 x 36.0 mm) Weight: 5.3 oz (150 g) Mounting: 2 each 0.1875 (4.3 mm) screw holes, one slotted Materials: Case: ABS (UL 94 V-0 Approved) Lid: PC (UL 94 V-1 Approved) Protection standard: IP54 / NEMA3

Display (optional) 3 1/2 Digit LCD Backlit Display 2-Line Display (12 character/line) Size: 1.81 W x 0.57 H (46.0 x 14.5 mm)

Electrical connections: 4 screw terminal block Wire: 12-24AWG (0.2 1.5 mm2

Cable Entry Strain Relief: M16 Knockout : 0.625 (16mm)

Pressure Fittings 3/16 (5.2mm) barbed brass + High pressure Low pressure

Electrical Voltage Circuit: 3-wire ([V Out], 24V, GND) Input: 24VAC or VDC, 10% Output: 0-10V or 0-5V, selectable via Jumper Power Consumption: <1.0W Resistance Minimum: 1k

Current Circuit: 3-wire (mA Out, 24V, GND) Input: 24VAC or VDC, 10% Output: 4

Robust and Versatile Transmitter

Designed for reliability, the DPT10-R8 features an industrial-grade polycarbonate enclosure rated to IP65, protecting the sensitive silicon sensor from dust and water. Compatible with a wide range of non-corrosive, non-combustible gases, its suitable for numerous industrial and HVAC applications. The inclusion of mounting brackets and an instruction manual simplifies setup.

Precise and Rapid Measurement

The DPT10-R8s electronic transducer ensures rapid response of less than 10 ms and accuracy within 1.5% of full scale. This makes it ideal for real-time monitoring and control, where both speed and reliability are critical. The 420 mA output integrates seamlessly with modern process control systems.

Easy Installation and Adjustment

Installation is made easy with wall-mount design, screw terminal electrical connections, and 1/8 NPT female threads. The front-accessible potentiometers allow for convenient zero and span adjustment during setup or periodic recalibration, without the need for disassembly.

FAQs of Sensocon USA Differential Pressure Transmitter Series DPT10-R8 - Range 0 - 127 mmWC:

Q: How do you install the Sensocon DPT10-R8 Differential Pressure Transmitter?

A: Install the DPT10-R8 using the provided wall mounting brackets and screws. Connect the electrical wiring via the screw terminal block, ensuring power supply is between 1230 VDC. Attach the pressure source to the 1/8 NPT female thread ports, following the instruction manual for correct positioning.

Q: What gases can be measured using this differential pressure transmitter?

A: The DPT10-R8 is designed to measure air and compatible non-combustible, non-corrosive gases. Using it with corrosive or combustible gases is not recommended, as this may damage the internal silicon sensor or compromise safety.

Q: When should I adjust the zero and span settings, and how is this done?

A: Zero and span adjustments should be made during initial setup or after significant maintenance. Adjustments are done via the front-accessible potentiometers without disassembling the enclosure, ensuring calibration aligns with your specific system requirements.

Q: Where is the Sensocon DPT10-R8 commonly used?

A: This transmitter is widely used in HVAC systems, clean rooms, filtration monitoring, and industrial process control where accurate and swift measurement of differential air or gas pressure is required.

Q: What are the main benefits of using the DPT10-R8 in my application?

A: Key benefits include its fast response time (<10 ms), robust IP65-rated enclosure, high accuracy (1.5% FS), and compatibility with standard 420 mA process control systems. Its easy to install and adjust, delivering long-term reliability for industrial applications.

Q: How is electrical connection achieved for the DPT10-R8?

A: Electrical connection is made using the screw terminal block located inside the enclosure, ensuring secure and straightforward wiring for the 2-wire 420 mA output.

Tell us about your requirement