Sensocon USA 212-D020I-3 Differential Pressure Transmitter

Get a Price/Quote

Sensocon USA 212-D020I-3 Differential Pressure Transmitter Specification

Thread
1/8 NPT Female (Process Connection)

Seal Material
Nitrile Rubber O-ring

Grade
Industrial Grade

Display
Digital, 4-digit LCD

Sensor Type
Differential Pressure Transmitter

Outer Size
122 x 70 x 43 mm (approx)

Material
High Impact Polycarbonate Enclosure

Processing Type
Electronic

Diameter
Not Applicable (Rectangular Casing)

Mount Type
Wall Mount / Surface Mount

Scale Range
0-20.0 in. H2O (Inches of Water)

Accuracy
1.0% FS

Finishing
Polycarbonate Enclosure, IP65 Rated

Measure Pressure Of
Air and Non-Corrosive Gases

Accessories
Mounting Screws, Instruction Manual, Calibration Certificate

Sensocon USA 212-D020I-3 Differential Pressure Transmitter Trade Information

Payment Terms
Cash on Delivery (COD), Cash Against Delivery (CAD), Cash Advance (CA), Cash in Advance (CID), Cheque

Main Export Market(s)
Australia, Middle East, Western Europe, Africa, Central America, South America, Asia, Eastern Europe, North America

Main Domestic Market
All India

About Sensocon USA 212-D020I-3 Differential Pressure Transmitter

Sensocon USA 212-D020I-3 Differential Pressure Transmitter

Maximum Pressure: Ranges : 5 PSI (35 kPa) = 15 PSI (100kPa) Max Ranges > 5 PSI (35 kPa) = 30 PSI (200kPa) Max
Media compatibility: Air and compatible non-combustible, non-corrosive gases
Accuracy: Ranges : 4" w.c. (1kPa) 1.0% Ranges : 5" w.c. (1.25kPa) 0.25%
Temperature Ranges: Compensated: 15° to 120°F (-10° to 50°C)Operating: -10° to 155°F (-25° to 70°C)
Thermal Effect: +/- 0.028% FS/°F (+/- 0.50% FS/C)
Stability: +/- 0.25% FS/year
Output Signal: 4-20 mA, 2-wire or 0 - 10 V
Loop Resistance: 250-24 VDC
Power Supply: 12-30 VDC
Enclosure Rating: IP 65
Electrical Connections: screw terminals
Electrical Entry: PG7 Cable Gland
Process Connection: Barbed fittings for 3/16 flexible tubing
Agency Approvals: CE

Key Features for Industrial Applications

The Sensocon 212-D020I-3 is tailored for industrial-grade differential pressure monitoring, ideal for HVAC, clean rooms, or filtration systems. It operates reliably within 0 to 50C, thanks to its IP65-rated enclosure and robust polycarbonate build. Its fast response time under 100 ms and high-accuracy sensor ensure consistent, real-time monitoring, which is essential for process control and safety.

User-Friendly Adjustments and Display

Adjusting and reading measurements is straightforward with the transmitters push-button zero/span on its front panel and a clear, 4-digit digital LCD. The accessible interface means minimal downtime or training, letting operators perform calibrations or troubleshooting quickly without dismantling the setup.

Dependable Installation and Versatility

With a compact, rectangular form (122 x 70 x 43 mm) and wall/surface mount configuration, the transmitter fits diverse installation scenarios. Its 1/8 NPT female process connections, 3-pin terminal block, and wide 1236 VDC power range accommodate various industrial setups, making it a dependable solution for suppliers, traders, and end-users alike.

FAQs of Sensocon USA 212-D020I-3 Differential Pressure Transmitter:

Q: How do I adjust the zero and span settings on the Sensocon 212-D020I-3?

A: Zero and span adjustments are easily made using the push-buttons on the front panel, allowing for convenient calibration without opening the enclosure or removing the device from its mount.

Q: What is the main benefit of the 212-D020I-3s polycarbonate enclosure?

A: The high impact polycarbonate enclosure offers IP65 (NEMA 4X) protection, safeguarding the transmitter against dust, moisture, and physical impacts, which is ideal for harsh industrial settings.

Q: When should this differential pressure transmitter be used?

A: The Sensocon 212-D020I-3 is best suited for monitoring air and non-corrosive gases in environments such as HVAC systems, clean rooms, or process control applications where quick, accurate pressure measurement is required.

Q: Where can the transmitter be installed?

A: This device is designed for wall or surface mounting in indoor locations, thanks to its compact size and rectangular casing, making it adaptable to a variety of industrial or commercial setups.

Q: What electrical connection does the device use?

A: The 212-D020I-3 uses a 3-pin terminal block for electrical connections and outputs a standard 420 mA (two-wire) signal, ensuring straightforward wiring and integration with control systems.

Q: How accurate is the Sensocon 212-D020I-3 and what pressure range does it measure?

A: It delivers high measurement accuracy within 1.0% FS and covers a differential pressure range of 0 to 20.0 inches of water column (in. H2O), making it reliable for precision applications.

Q: What accessories are provided with the product?

A: The package includes mounting screws, an instruction manual, and a calibration certificate to facilitate seamless installation and compliance with quality standards.

Tell us about your requirement