Mark II Model 40-25MM Dwyer Manometer Range 0-26 MM W.C

About Mark II Model 40-25MM Dwyer Manometer Range 0-26 MM W.C

Mark II Model 40-25MM  Dwyer Manometer Range 0-26 MM W.C 

Dwyer A-489 SS Straight Static Pressure Tip With Flange, 4" (101 MM) Insertion Depth

Key Features:

·         Rapid Shutoff Pressure Connections and Integral Overpressure Safety Traps

·         Requires Pitot Tube, Not Included

Applications:

·         Air Velocity

·         Air Filter Guge

Other Details:
The Dwyer MARKII40255MM Molded Plastic Inclined Manometer, 0-26 mm w.c., Red Gauge Fluid Provides linear Calibration and Excellent Resolution Throughout its Range. This model is capable of pressure Measurements above and below Atmospheric as well as Differential Pressure Measurements. The MARK II 40-255MM includes Accessories to Enable Portable Use of The Unit

Included:

·         2 - Tubing connectors for 1/8 in. Pipe or Sheet Metal Ducts

·         2 - Mounting Screws

·         2 - 4-1/2'' lengths of clear plastic Tubing

·         1 - Plastic Swing-Out Stand

·         1 - Leveling Screw

·         1 - 1 ounce bottle of indicating fluid

·         1 - Set of red and green pointer flags

·         1 - User Manual

• Specifications

INCLINED/VERTICAL

• Accuracy: ±3% FS.
• Temperature Limits: 140°F (60°C).
• Pressure Limits: 10 psi (70 kPa).
• Weight: 1.04 lb (472 g).
• Agency Approvals: Meets the technical requirements of EU Directive 2011/65/EU (RoHS II).

INCLINED

Accuracy: ±3% FS.

Temperature Limits: 150°F (65°C).

Pressure Limits: 15 psi (100 kPa).

Scale Length: Approx. 8-1/4" (21 cm).

Weight: 1.23 lb (558 g).

Agency Approvals: Meets the technical requirements of EU Directive 2011/65/EU (RoHS II).

Features

1.     Broad ranging in easy to read calibrated increments

Gages ideally suited for general measurements and specific air applications

Compact, stationary or portable device, make it a simple to use tool for pressure measurement in OEM or user applications

Options

OEM Specials - All DwyerMark II Molded Plastic Manometers can be supplied in OEM quantities with your name and special graphics and scale.

Accessories

Model NumberDescription

• A-612Portable stand.
• A-606Air filter kit for Series Mark II.
• A-1011 oz dispenser bottle of red gage fluid, .826 sp. gr.
• A-1024 oz bottle of red gage fluid, .826 sp. gr.
• A-1031 pt bottle of red gage fluid, .826 sp. gr.
• A-1041 qt bottle of red gage fluid, .826 sp. gr.
• A-1101 oz dispenser bottle of blue gage fluid, 1.910 sp. gr.
• A-1111 pt bottle of blue gage fluid, 1.910 sp. gr.
• A-4894" 303 SS straight static pressure tip with flange, 1/4" hose barb.
• A-225Flexible double column plastic tubing, lt. grey, with red color code stripe, 1/8" ID, lengths to 750 ft, per ft.
• A-315Gage connector, shutoff type, for 3/16" rubber tubing.
• 420706-00Red pointer indicator.

420706-01Green pointer indicator.

A-220Clear flexible vinyl tubing is easily inspected, and is therefore best for test applications where a possibility of fluid entering the tubing exists. 3/16" ID x 5/16" OD, lengths to 500'; 45 psi maximum pressure 73°F.

A-480 Plastic static pressure tip.

Related Products

• Series DH DigihelicDifferential Pressure Controller
• Series 2000 MagnehelicDifferential Pressure Gages
• Series 2-5000 MinihelicII Differential Pressure Gage
• Series 475 Intrinsically Safe Handheld Digital Manometer
• Series DHII DigihelicDifferential Pressure Controller
• Series 476A Single Pressure & Series 478A Digital Manometer
• Series DH3 DigihelicDifferential Pressure Controller