Dwyer USA Magnehelic Gauges 0 To 100 MM WC

About Dwyer USA Magnehelic Gauges 0 To 100 MM WC

Dwyer USA Magnehelic Gauges 0 To 100 MM WC

Select the Magnehelic gage for high accuracy--guaranteed within 2% of full scale and for the wide choice of 81 models  available to suit your needs precisely. Using Dwyer's simple, frictionless Magnehelic gage movement, it quickly indicates low air or non-corrosive gas pressures--either positive, negative (vacuum) or differential. The design resists shock, vibration and over-pressures. No manometer fluid to evaporate, freeze or cause toxic or leveling problems. It's inexpensive, too.

The Magnehelic gage is the industry standard to measure fan and blower pressures, filter resistance, air velocity, furnace draft, pressure drop across orifice plates, liquid levels with bubbler systems and pressures in fluid amplifier or fluidic systems. It also checks gas-air ratio controls and automatic valves, and monitors blood and respiratory pressures in medical care equipment.

Note: May be used with Hydrogen. Order a Buna-N diaphragm.

Pressures must be less than 35 psi.

Bezel provides flange for flush mounting in panel.

Clear plastic face is highly resistant to breakage. Provides undistorted viewing of pointer and scale.

Precision litho-printed scale is accurate and easy to read.

Red tipped pointer of heat treated aluminum tubing is easy to see. It is rigidly mounted on the helix shaft.

Pointer stops of molded rubber prevent pointer over-travel without damage.

"Wishbone" assembly provides mounting for helix, helix bearings and pointer shaft.

Jeweled bearings are shock-resistant mounted; provide virtually friction-free motion for helix. Motion damped with high viscosity silicone fluid.

Zero adjustment screw is conveniently located in the plastic cover, and is accessible without removing the cover. O-ring seal provides pressure tightness.

Helix is precision made from an alloy of high magnetic permeability. Mounted in jeweled bearings, it turns freely, following the magnetic field to move the pointer across the scale.

Samarium Cobalt magnet mounted at one end of range spring rotates helix without mechanical linkages.

Calibrated range spring is flat spring steel. Small amplitude of motion assures consistency and long life. It reacts to pressure on diaphragm. Live length adjustable for calibration.

Silicone rubber diaphragm with integrally molded O-ring is supported by front and rear plates. It is locked and sealed in position with a sealing plate and retaining ring. Diaphragm motion is restricted to prevent damage due to overpressures.

Die cast aluminum case is precision made and iridite-dipped to withstand 168 hour salt spray corrosion test. Exterior finished in baked dark gray hammerloid. One case size is used for all standard pressure options, and for both surface and flush mounting.

Blowout plug of silicone rubber protects against overpressure on 15 psig rated models. Opens at approximately 25 psig.

O-ring seal for cover assures pressure integrity of case.

Applications

Filter Monitoring

Air Velocity with Dwyer Pitot Tube

Blower Vacuum Monitoring

Fan Pressure Indication

Duct, Room or Building Pressures

Clean Room Positive Pressure Indication

Precision and Durability for Demanding Environments

Engineered with a die-cast aluminum case and a clear acrylic front, the Dwyer Magnehelic Gauge is built to withstand rigorous industrial use. Its robust construction guarantees reliable performance and longevity, while the IP50 enclosure rating provides protection from dust. The gauges wide operating temperature range, advanced diaphragm-sensing technology, and factory calibration ensure consistent, accurate readings in diverse applications.


Versatile Applications Across Industries

This gauge excels in monitoring air or non-corrosive gas pressures, making it crucial for HVAC filter status, duct and room pressure control, and cleanroom environments. With a scale range up to 100 mm WC and accuracy to 2% of full scale, professionals can ensure optimal system performance. Multiple mounting and port options accommodate various installation needs, enhancing its adaptability.