Dwyer 2060D Magnehelic Differential Pressure Gauge

About Dwyer 2060D Magnehelic Differential Pressure Gauge

Dwyer 2060D Magnehelic Differential Pressure Gauge

Dwyer Instruments 2060D

Magnehelic Pressure Gauge 0-60 in H2O, 0-15 kPa

Dual scale. Bezel provides flange for flush mounting in panel. Clear plastic face is highly resistant to breakage. Provides undistorted viewing of pointer and scale.

Dwyer 2060D MAGNEHELIC, DIFFERENTIAL PRESSURE GAUGE, 0 - 60, 0-15 KPA

Precision litho-printed scale is accurate and easy to read.

Red tipped pointer of heat treated aluminum tubing is easy to see. It is rigidly mounted on the helix shaft.

Pointer stops of molded rubber prevent pointer over-travel without damage.

"Wishbone" assembly provides mounting for helix, helix bearings and pointer shaft.

Jeweled bearings are shock-resistant mounted; provide virtually friction-free motion for helix. Motion damped with high viscosity silicone fluid.

Zero adjustment screw is conveniently located in the plastic cover, and is accessible without removing the cover. O-ring seal provides pressure tightness.

Helix is precision made from an alloy of high magnetic permeability. Mounted in jeweled bearings, it turns freely, following the magnetic field to move the pointer across the scale.

Samarium Cobalt magnet mounted at one end of range spring rotates helix without mechanical linkages.

Calibrated range spring is flat spring steel. Small amplitude of motion assures consistency and long life. It reacts to pressure on diaphragm. Live length adjustable for calibration.

Silicone rubber diaphragm with integrally molded O-ring is supported by front and rear plates. It is locked and sealed in position with a sealing plate and retaining ring. Diaphragm motion is restricted to prevent damage due to overpressures.

Die cast aluminum case is precision made and iridite-dipped to withstand 168 hour salt spray corrosion test. Exterior finished in baked dark gray hammerloid. One case size is used for all standard pressure options, and for both surface and flush mounting.

Blowout plug of silicone rubber protects against overpressure on 15 psig rated models. Opens at approximately 25 psig.

O-ring seal for cover assures pressure integrity of case.

What's included with the Dwyer 2060D

Dwyer 2060D Magnehelic Differential Pressure Gauge (0-60"w.c. & 0-15 kPa)

Precision Differential Pressure Measurement

Engineered for industrial environments, the Dwyer 2060D offers 2% full-scale accuracy across a 02000 Pa range. Its immediate mechanical response and external zero adjustment allow for quick calibration and real-time, reliable readings. The analog dial with clear black and red markings ensures high visibility for operators.


Robust and User-Friendly Design

The gauge features a textured grey die-cast aluminum case and an acrylic cover, making it both robust and aesthetically pleasing. The front dustproof protection and silicone rubber seals enhance durability and maintain measurement integrity, even in demanding settings. Surface and flush mounting provide versatile installation options.


Comprehensive Accessories for Easy Installation

Every gauge comes complete with two 1/8 NPT plugs, mounting brackets, and screws, facilitating straightforward setup. The factory-calibrated, ready-to-use design combined with a 127 mm (5 inch) diameter ensures compatibility with most industrial panels and settings.