ENVIRO TECH INDUSTRIAL PRODUCTS
GST : 07AOSPS8386M1ZM

Call us now

08045477767

Sensocon USA Differential Pressure Transmitter Series DPT10-R8 - Range -1250 - 1250 Pa

Send Inquiry

Request To Call Back

Sensocon USA Differential Pressure Transmitter Series DPT10-R8 - Range -1250 - 1250 Pa

Get a Price/Quote

Sensocon USA Differential Pressure Transmitter Series DPT10-R8 - Range -1250 - 1250 Pa Specification

Thread
1/8 NPT Female

Grade
Industrial Grade

Seal Material
Silicone

Display
Digital LCD

Sensor Type
Differential Pressure Transmitter

Outer Size
90 mm x 35 mm x 150 mm (W x D x H)

Material
ABS, Aluminum

Dial Material
ABS Plastic

Processing Type
Electronic Measurement

Diameter
90 mm (Front Face)

Mount Type
Wall Mount

Scale Range
-1250 to 1250 Pa

Accuracy
1% of Full Scale

Finishing
Anodized Aluminum

Measure Pressure Of
Air and Non-Corrosive Gases

Accessories
Mounting Bracket, Instruction Manual

Sensocon USA Differential Pressure Transmitter Series DPT10-R8 - Range -1250 - 1250 Pa Trade Information

Payment Terms
Cash on Delivery (COD), Cash Against Delivery (CAD), Cash Advance (CA), Cash in Advance (CID), Cheque

Main Export Market(s)
Australia, North America, South America, Eastern Europe, Middle East, Western Europe, Africa, Central America, Asia

Main Domestic Market
All India

About Sensocon USA Differential Pressure Transmitter Series DPT10-R8 - Range -1250 - 1250 Pa

Sensocon USA Differential Pressure Transmitter Series DPT10-R8 - Range -1250 - 1250 Pa

APPLICATIONS

DPT-R8 series devices are commonly used in HVAC/R systems for: Fan, blower and filter monitoring Pressure and flow monitoring Valve and damper control Pressure monitoring in clean rooms

WARNING

READ THESE INSTRUCTIONS CAREFULLY BEFORE ATTEMPTING TO INSTALL, OPERATE OR SERVICE THIS DEVICE.

Failure to observe safety information and comply with instructions could result in PERSONAL INJURY, DEATH AND/ OR PROPERTY DAMAGE.

To avoid electrical shock or damage to equipment, disconnect power before installing or servicing and use only wiring with insulation rated for full device operating voltage.

To avoid potential fire and/or explosion do not use in potentially flammable or explosive atmospheres.

Retain these instructions for future reference.

This product, when installed, will be part of an engineered system whose specifications and performance characteristics are not designed or controlled by Sensocon. Review applications and national and local codes to assure that the installation will be functional and safe. Use only experienced, knowledgeable, technicians to install this device.

SPECIFICATIONS

Performance Accuracy (at applied pressure) Ranges < 0.5 inWC = 0.01 inWC Ranges 0.5 inWC = 1.5% inWC Accuracy specifications include: general accuracy, temperature drift, linearity, hysteresis, long term stability, and repetition error

Thermal Effects Temperature compensated across the full spectrum of capability

Overpressure Proof Pressure: 100 inWC Burst Pressure: 120 inWC

Zero Point Calibration Automatic with function or Manual push-button Auto-Zero

Response Time 4.0 0.8 sec, Selectable via Jumper

Technical Specifications Media Compatibility Dry air or non-aggressive gases

Measuring Units (select via Jumper) Pa, kPa, mbar, inWC, mmWC Measuring Element Piezoresistive

Environment: Operating Temperature: 14 122F (-10 50C) Storage Temperature: -4 158F (-20 70C) Humidity: 0 to 95 % rH, non condensing

Physical Case Dimensions: 3.54 x 3.74 x 1.4 (90.0 x 95.0 x 36.0 mm) Weight: 5.3 oz (150 g) Mounting: 2 each 0.1875 (4.3 mm) screw holes, one slotted Materials: Case: ABS (UL 94 V-0 Approved) Lid: PC (UL 94 V-1 Approved) Protection standard: IP54 / NEMA3

Display (optional) 3 1/2 Digit LCD Backlit Display 2-Line Display (12 character/line) Size: 1.81 W x 0.57 H (46.0 x 14.5 mm)

Electrical connections: 4 screw terminal block Wire: 12-24AWG (0.2 1.5 mm2

Cable Entry Strain Relief: M16 Knockout : 0.625 (16mm)

Pressure Fittings 3/16 (5.2mm) barbed brass + High pressure Low pressure

Electrical Voltage Circuit: 3-wire ([V Out], 24V, GND) Input: 24VAC or VDC, 10% Output: 0-10V or 0-5V, selectable via Jumper Power Consumption: <1.0W Resistance Minimum: 1k

Current Circuit: 3-wire (mA Out, 24V, GND) Input: 24VAC or VDC, 10% Output: 4

Advanced Differential Pressure Sensing

Built with precision in mind, the Series DPT10-R8 delivers reliable readings for air and non-corrosive gases. Its integrated digital LCD provides clear, real-time data, and its grade ensures consistent performance in industrial settings. The transmitters robust engineering supports high accuracy and long-term operation.

User-Friendly Installation and Adjustment

The transmitter includes a mounting bracket and features screw terminal connections for straightforward installation. Zero and span adjustments can be easily made on the devices front panel, streamlining calibration and setup without special tools. Accessories and a clear instruction manual are provided for user convenience.

Versatile Output and Safety Features

Selectable 4-20 mA and 0-10 V output signals allow integration with diverse control systems. Overpressure protection up to 10 kPa enhances safety, while the IP54 ingress protection guards against dust and splashes. With anodized aluminum finishing, the device is as durable as it is functional.

FAQs of Sensocon USA Differential Pressure Transmitter Series DPT10-R8 - Range -1250 - 1250 Pa:

Q: How do I adjust the zero and span on the Sensocon DPT10-R8 differential pressure transmitter?

A: Zero and span adjustments are easily accomplished via the dedicated front button on the transmitter. Follow the step-by-step guidance in the supplied instruction manual to ensure precise calibration tailored to your specific application needs.

Q: What types of gases can the DPT10-R8 measure, and is it suitable for corrosive media?

A: The DPT10-R8 is designed to measure the differential pressure of air and non-corrosive gases. It is not recommended for use with aggressive or corrosive media, as it is constructed with ABS, anodized aluminum, and a silicone seal that may degrade with incompatible substances.

Q: Where is the best location to install this differential pressure transmitter?

A: For accurate measurement, mount the transmitter on a wall using the included bracket, in a location free from vibration and direct moisture exposure. Its IP54 rating makes it suitable for many indoor industrial environments that require dust and splash protection.

Q: What output options does the Series DPT10-R8 offer, and how do I select between them?

A: This device provides selectable output signals4-20 mA (2-wire) or 0-10 Vto accommodate a variety of control systems. Selection can typically be made via onboard jumpers or switches, as detailed in the instruction manual that comes with your transmitter.

Q: When is it necessary to use overpressure protection, and how does the DPT10-R8 handle this?

A: Overpressure protection is crucial in applications where transient spikes can occur. The DPT10-R8 is equipped to withstand up to 10 kPa, safeguarding internal components and ensuring reliable operation even during occasional pressure excursions above its rated measuring range.

Q: What are the main benefits of choosing the Sensocon Series DPT10-R8 for industrial pressure measurement?

A: Key benefits include high accuracy (1% FS), fast response time (1 second), robust construction, dual selectable output signals, easy wall-mount installation, and clear digital display. Its IP54 protection and compatibility with non-corrosive gases make it versatile and reliable for various HVAC and process monitoring tasks.

Tell us about your requirement