Dwyer A3000-0AV Photohelic Pressure Switch Gauge Range 0-.50 Inch w.c./500-2800 FPM

About Dwyer A3000-0AV Photohelic Pressure Switch Gauge Range 0-.50 Inch w.c./500-2800 FPM

Dwyer A3000-0AV Photohelic Pressure Switch Gauge Range  0-.50 Inch w.c./500-2800 FPM

Dwyer Instruments A3000-0AV

Photohelic Pressure Switch/Gage Range 0-.50" w.c./500-2800 FPM

PhotohelicSwitch/Gages Function As Versatile, highly repeatable pressure switches combined with a precise pressure gage employing the time-proven Magnehelicgage design. The Photohelicswitch/gage measures and controls positive, negative or Differential Pressures of air and compatible gases. Standard models are rated to 25 psig (1.7 bar) with options to 35 (2.4) or 80 (5.5 bar) psig. Single pressure 36000S models measure to 6000 psig (413 bar) with a 9000 psig (620 bar) rating. Two phototransistor actuated, DPDT relays are included for low/high limit control. Easy to adjust set point indicators are controlled by knobs located on the gage face. Individual set point deadband is one pointer width - less than 1% of full scale. Set points can be interlocked to provide variable deadband - ideal for control of fans, dampers, etc. Gage reading is continuous and unaffected by switch operation, even during loss of electrical power. Choose from full scale pressure ranges from a low 0-.25" (0-6 mm) w.c. up to 30 psi (21 bar); single positive pressure to 6000 psig (413 bar).

Availability: Item ships in about Ships in 4-6 week

Product Highlights

Range 0-.50" w.c./500-2800 FPM

Specifications

GAGE SPECIFICATIONS

Service:Air and non-combustible, compatible gases.

Wetted Materials:Consult Factory.

Accuracy:2% of FS at 70F (21.1C). 3% on -0 and 4% on -00 models.

Pressure Limits:-20" Hg. to 25 psig (-0.677 to 1.72 bar). MP option; 35 psig (2.41 bar), HP option; 80 psig (5.52 bar).

Temperature Limits:20 to 120F. (-6.67 to 48.9C). -20 to 120F (-28 to 48.9C) with low temperature option.

Process Connections:1/8" female NPT.

Size:4" (101.6 mm) dial face, 5" (127 mm) O.D. x 8-1/4" (209.55 mm).

Weight:4 lb (1.81 kg).

SWITCH SPECIFICATIONS

Switch Type:Each setpoint has 2 Form C relays (DPDT).

Repeatability:1% of FS.

Electrical Rating:10 A @ 28 VDC, 10 A @ 120, 240 VAC.

Electrical Connections:Screw terminals. Use 167F (75C) copper conductors only.

Power Requirements:120 VAC, 50/60 Hz; 240 VAC & 24 VAC power optional.

Mounting Orientation:Diaphragm in vertical position. Consult factory for other position orientations.

Set Point Adjustment:Adjustable knobs on face.