About Dwyer 2000-80CM Magnehelic Differential Pressure Gauge

Dwyer 2000-80CM Magnehelic Differential Pressure Gauge

Model: 2000Differential Pressure Gage, Range 0-80 CM W.C., Minor Divisions 2.0.

Bezel provides Flange For Flush Mounting in Panel. Clear Plastic Face is Highly Resistant to Breakage. Provides Undistorted Viewing of Pointer and Scale.

Dwyer 2000 MAGNEHELIC, DIFFERENTIAL PRESSURE GAUGE0-80 CM

Precision litho-printed scale is accurate and easy to read.

Red tipped pointer of heat treated aluminum tubing is easy to see. It is rigidly mounted on the helix shaft.

Pointer stops of molded rubber prevent pointer over-travel without damage.

"Wishbone" assembly provides mounting for helix, helix bearings and pointer shaft.

Jeweled bearings are shock-resistant mounted; provide virtually friction-free motion for helix. Motion damped with high viscosity silicone fluid.

Zero adjustment screw is conveniently located in the plastic cover, and is accessible without removing the cover. O-ring seal provides pressure tightness.

Helix is precision made from an alloy of high magnetic permeability. Mounted in jeweled bearings, it turns freely, following the magnetic field to move the pointer across the scale.

Samarium Cobalt magnet mounted at one end of range spring rotates helix without mechanical linkages.

Calibrated range spring is flat spring steel. Small amplitude of motion assures consistency and long life. It reacts to pressure on diaphragm. Live length adjustable for calibration.

Silicone rubber diaphragm with integrally molded O-ring is supported by front and rear plates. It is locked and sealed in position with a sealing plate and retaining ring. Diaphragm motion is restricted to prevent damage due to overpressures.

Die cast aluminum case is precision made and iridite-dipped to withstand 168 hour salt spray corrosion test. Exterior finished in baked dark gray hammerloid. One case size is used for all standard pressure options, and for both surface and flush mounting.

Blowout plug of silicone rubber protects against overpressure on 15 psig rated models. Opens at approximately 25 psig.

O-ring seal for cover assures pressure integrity of case.

Reliable Differential Pressure Measurement

Engineered for industrial precision, the Dwyer 2000-80CM Magnehelic Gauge measures differential air and non-corrosive gas pressures across a wide 08000 Pa range. Its external zero adjustment and instantaneous mechanical response ensure consistent, accurate readings in demanding settings. The robust die-cast aluminum construction and powder-coated finish provide durability, while the IP54 rating safeguards against dust and splashes.


Versatile Mounting and Connectivity

Designed with side and back connection ports, the gauge offers flexible installation optionsmount it vertically on surfaces or flush into panels. Female 1/8 NPT threads ensure compatibility with standard fittings, while the included mounting hardware, pressure taps, and plastic tubing simplify setup for any application.


Clear Dual Scale Display

The analog dial features a dual scale in Pascals and millimeters of water, enabling intuitive readings at a glance. The precision-balanced aluminum pointer, white aluminum dial, and full-view acrylic lens combine visual clarity with industrial-grade construction, supporting accurate monitoring where reliability matters most.