About Dwyer 2-5000-25MM Minihelic II Differnntial Pressure Gauge 0-25 MM w.c
Dwyer 2-5000-25MM Minihelic II Differnntial Pressure Gauge 0-25 MM w.c
Housing Is Molded From Strong Mineral And Glass Filled Nylon. Pointer Stops of Molded Rubber Prevent Pointer Over Travel Without Damage.
DESCRIPTION
Dwyer 2-5000-25MM MINIHELIC II, DIFFERENTIAL PRESSURE GAUGE, 0/25MM
- Housing is molded from Strong Mineral and Glass Filled Nylon.
- Pointer Stops of Molded Rubber Prevent Pointer Over-Travel Without Damage.
- Full view lens is Removable and Molded of Tough Acrylic.
- Aluminum scale litho-printed black on white, enhances Readability.
- Red Tipped Aluminum Pointer, Rigidly Mounted to Helix is easy to see.
- Wishbone assembly provides mounting for helix, helix bearings, and pointer shaft.
- Jewel bearings provide virtually friction-free helix motion.
- Helix is free to rotate in jewel bearings. It aligns with magnetic field of magnet to transmit pressure indications to pointer.
- Zero adjustment screw, located behind the removable lens, eliminates tampering.
- Range spring calibration clamp fixes live length of spring for proper gauge calibration and is factory set and sealed.
- Silicone rubber diaphragm allows accurate response to a broad range of temperatures and at extremely low pressure. Incorporates blow out area for overpressure protection.
- Diaphragm support plates of lightweight aluminum on each side of the diaphragm minimize position or attitude sensitivity and help define pressure area.
- Flat leaf range spring reacts to pressure on the diaphragm. Live length is adjustable for calibration. Small amplitude of motion minimizes inaccuracies and assures long life.
- Low pressure tap connects to rear chamber.
- Coil spring link provides a resilient connection between the diaphragm and the range spring.
- Ceramic magnet mounted on a molded bracket at the end of the range spring rotates the helix without direct mechanical linkage.
- High pressure tap connects with the front chamber through passageway in the plastic case and a sealing ring molded into the edgeof the diaphragm.
Dwyer 2-5000-25MM Specifications
| Service | Air and compatible gases |
| Housing | Glass Filled Nylon Polycarbonate Lens |
| Accuracy | 5% of FS at 70F (21.1 C) |
| Pressure Limits | 30 psig (2.067 bar) Continuous to Either Pressure Connection |
| Temperature Limits | 20 to 120F (-6.67 to 48.9 C) |
| Mounting Orientation | Diaphragm in Vertical Position |
| Process Connections | Barbed, for 316" ID tubing (standard) " male NPT (optional) |
| Weight | 6 oz (170.1 g) |
| Agency Approvals | Meets the technical requirements of EU Directive 2011/65/EU (RoHS II) |
FAQs of Dwyer 2-5000-25MM Minihelic II Differnntial Pressure Gauge 0-25 MM w.c:
Q: What is the weight of the Dwyer 2-5000-25MM Minihelic II Differential Pressure Gauge?
A: The weight of the Dwyer 2-5000-25MM Minihelic II Differential Pressure Gauge is 6 oz (170.1 g).
Q: What is the accuracy of the Dwyer 2-5000-25MM Minihelic II Differential Pressure Gauge?
A: The accuracy of the Dwyer 2-5000-25MM Minihelic II Differential Pressure Gauge is +-5% of FS at 70F (21.1C).
Q: Does the Dwyer 2-5000-25MM Minihelic II Differential Pressure Gauge have a display?
A: No, the Dwyer 2-5000-25MM Minihelic II Differential Pressure Gauge does not have a display.
Q: What is the scale range of the Dwyer 2-5000-25MM Minihelic II Differential Pressure Gauge?
A: The scale range of the Dwyer 2-5000-25MM Minihelic II Differential Pressure Gauge is 0 - 25 MM WC.
Q: What is the diameter of the Dwyer 2-5000-25MM Minihelic II Differential Pressure Gauge?
A: The diameter of the Dwyer 2-5000-25MM Minihelic II Differential Pressure Gauge is 63 MM.